SLD 56W Four Channels Output LED Dimming Driver

SLD056 SERIES SPECIFICATIONS
Model | Output Current (±5%) (mA) | Output Voltage (V) | Efficiency | PF | No Load Output Voltage (±5%) (V) | Ripple & Noise (V) | ||
110V Input | 220V Input | 110V Input | 220V Input | |||||
SLD056-0350QW | 350 | 12 ~ 40 | 84% | 86% | 0.99 | 0.96 | 47 | 0.3 |
SLD056-0400QW | 400 | 11 ~ 35 | 84% | 86% | 0.99 | 0.96 | 42 | 0.3 |
SLD056-0450QW | 450 | 9 ~ 31 | 83% | 85% | 0.99 | 0.96 | 38 | 0.2 |
SLD056-0480QW | 480 | 9 ~ 29 | 83% | 85% | 0.99 | 0.96 | 38 | 0.2 |
SLD056-0550QW | 550 | 8 ~ 25 | 83% | 85% | 0.99 | 0.96 | 32 | 0.2 |
NOTE: 1. All specifications are typical at 25°C unless otherwise stated.
2. The "Efficiency" & PF values are measured at full load, after the unit is thermally stabilized, otherwise they will be lower about 1%
3. The Ripple & Noise values are measured by 20MHz bandwidth oscilloscope and the output paralleled a 0.1uF ceramic capacitor and a 10uF electrolytic capacitor.
ELECTRICAL SPECIFICATIONS
| Parameter | Values | Conditions |
INPUT | AC Voltage | 90 ~ 305 Vac | Operating Voltage |
Frequency Range | 47 ~ 63 Hz |
| |
PF(110V input) | 0.99 | Full load, Vin=110V | |
PF(220V input) | 0.96 | Full load, Vin=220V | |
AC Current (110V input) | 0.62 A | Full load, Vin=110V | |
AC Current (220V input) | 0.30 A | Full load, Vin=220V | |
Inrush Current | 35 A | Cold start, Vin=230V | |
Leakage Current | 0.5 mA | Vin=277V, 50Hz | |
OUTPUT | Top Output Power | 56 W |
|
Output Channel | 4 |
| |
Set-up Delay Time | 1.0 ~ 2.0 s |
| |
Line Regulation | 1% |
| |
Load Regulation | 3% |
| |
DIMMING | 10V Output Voltage | 10~11 V |
|
10V Output Source Current | 0~10 mA |
| |
Absolute Max. Voltage | 0~12 V | On the 1-10V input pin | |
Source Current | 0~10 mA | ||
PROTECT | Over Voltage Protect | 50 V | ±5% floating deviation |
Latch mode.The power supply shall return to normal operation only after the power is turn-on again. | |||
Short Circuit Protect | No damage shall occur when any output operating in a short circuit condition. The power supply shall be self-recovery when the fault condition is removed. | ||
Over Temperature Protect | 110°C |
| |
NOTE: 1. All specifications except OTP are measured at 25°C .
PRODUCTS INFORMATION
Parameter | Values |
Working Temp., Humidity | -35°C ~ +55°C; 10 ~ 100% RH non-condensing |
Storage Temp., Humidity | -40°C ~ +85°C; 5 ~ 100% RH |
MTBF | 470,000 hours |
Life Time | 85,000 hours |
Dimension | Inches (L*W*H) 9.53*1.61*1.17 |
Milimeters (L*W*H) 242*41*29.8 | |
Net Weight | 455g |
SLD 56W Four Channels Output LED Dimming Driver Manufacturer search on:Google, Yahoo, Msn
Related Category: LED Driver Dimmable »











